Lithium iron phosphate vacuum rake dryer
Introduction:The horizontal mixing vacuum dryer is a device that uses the characteristic of the boiling point of water in the material decreasing under vacuum to dry. The device uses steam (hot water, thermal oil) to indirectly heat the jacket, causing the water to evaporate and be promptly removed. Inside the dryer shell, the rake teeth are driven by a transmission shaft, and the rake teeth end is designed to have a certain angle with the axis. The main shaft rotates in both forward and reverse directions, causing the material to move along the axis to facilitate drying and discharging. Two or four tappin···
Tel:13906123780
Detail
Photo


Application customers

Hefei Guoxuan Hi-tech, Ningbo Moxi Technology, Hubei Wanrun New Materials, Ningde New Energy, Sichuan Xingneng New Materials, Inner Mongolia Guhua Carbon New Materials Technology, Shenzhen Yineng New materials, Xiangyang Huahong New Materials, Foshan Defang Nano new Materials


Project description

The horizontal stirring vacuum dryer of lithium iron phosphate drying project is a drying equipment that uses the boiling point of water in the material to reduce in the vacuum state.


Material description

The performance of lithium-ion batteries mainly depends on the positive and negative electrode materials, lithium iron phosphate as an emerging lithium-ion battery positive material, its safety performance and cycle life than other positive electrode materials have obvious advantages, these are the most important technical indicators of power batteries. Lithium iron phosphate has the advantages of non-toxic, harmless, good safety and long life, and has become one of the ideal cathode materials for a new generation of lithium-ion batteries.


Working principle

Horizontal stirring vacuum dryer is a drying equipment that uses the boiling point of water in the material to reduce in the vacuum state. The equipment uses steam (hot water, heat conduction oil) to indirectly heat the jacket, and the water is evaporated by heat and pumped out in time. Inside the dryer shell, the harrow teeth are driven by the drive shaft, the harrow tooth end is designed to have a certain Angle with the axis, and the main shaft is rotated forward and backward to make the material move along the axis to facilitate drying and discharging. Two or four percussion rods can be added to the inside of the shell to facilitate the rapid drying and crushing of the material. The tapping rod is a hollow thick wall stainless steel tube equal to the length of the shell, which is free movement inside the shell, and the tapping rod continuously knocks the material inside, so that the material is constantly broken (the material gets a larger specific surface area) to accelerate the drying process, and the finished material is of better quality.


Previous :Mesophase carbon microsphere disc drying engineering

Next:Lithium iron phosphate double cone rotary vacuum dryer

Jiangsu Yutong Drying Engineering Co., Ltd
General Manager: Lu Wenguang 13906123780
Sales Vice President: Cha Yongqiang 13775013377
Tel:0519-88908088 88901088
Address: No. 68 Shunhe Road, Jiaoxi, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province
Copyright© 2014 Jiangsu Yutong Drying Engineering Co., Ltd .All Rights Reserved
TOP